Kentix KSS-BASIC-2-B Manual de servicio descargar pdf (Pagina 26)



Navigation

Dashboard - Starting page with measurement table, control of the 2nd digital output, logbook

Configuration - Basic configuration, MultiSensor (Sensor- and alarm settings), Users (Login,E-Mail)

System - System information (software version), test functions, configuration management,#

firmware update, device reset#

- logbook

Help - Help and support information

Logout - User logout

5.4.4. Configuration - Basic configuration

Device name

Configuration of the device name, this name can be chosen freely.

Language

Select the displayed language of the MultiSensor‘s Website.#

You can choose between german and english language.

Temperature unit

Switches the temperature evaluation and display of the MultiSensor-LAN between celsius and fahrenheit.

IP address / network mask / gateway / DHCP / MAC-address

Network configuration of the MultiSensor. If DHCP is enabled, the DHCP server should always assign the

same IP address to the MultiSensor-LAN.

If you need the MAC address of the MultiSensor for your router or firewall settings, you will find it here.

DNS1/2 (Domain Name Server Addresses)

Enter the name server address. Depending on network configuration e.g. on use of an ADSL router it can be

the gateway address.

Public DNS servers: 8.8.8.8 or 8.8.8.4

NTP1/2

Configuration of the time server (network time protocol). The NTP configuration is needed if you use the

time-controlled arming and disarming.

Public NTP servers: 0.de.pool.ntp.org or 1.de.pool.ntp.org

IP-address and activation of AlarmManager communication

Activate the communication with the Kentix AlarmManager-PRO here. Enter the IP-address of the

AlarmManager and activate the checkbox.



FTP server activation

The integrated FTP server can be activated or deactivated. The FTP access will be needed for a software

update of devices with an old firmware version (< 4.00.00). Look up in the chapter „software update“ for it.

 "

Der AlarmManager-PRO takes control of the configuration of the MultiSensors alarm settings.#

The local alarm- / threshold values are then inactive.

When changing the network settings, the MultiSensor automatically performs a reset.

Page  (04-2015, subject to change) kentix.com26

NOTE!

The Sensor records a value for temperature and humidity every 10 minutes. Additionally the values in an

alert case are also recorded.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 75 76

Comentarios a estos manuales

Sin comentarios

Kentix KSS-BASIC-2-B Manual de servicio Pagina 26

Comentarios a estos manuales

Relacionado con productos y manuales para Sistemas De Alarma De Seguridad Kentix KSS-BASIC-2-B